一肖一马特期期准

        <form id="zzvzj"></form>

        3100 Series V-Rakes

        3100 Series Rakes are available in 8, 10, & 12 Wheel Models

        • High Clearance Action Rakes features a “KWIK PIK” (patented) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
        • An Adjustable Hitch allows you to level the rake for efficient raking.
        • Right and left side raking is done easily by turning either one of the wing transport valves off.
        • A 49″ Center Kicker Wheel is optional on all Action Rakes.
        • The hitch jack is used to adjust the windrow width as shown.
        • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
        • The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.
        3108
        NUMBER OF WHEELS 8
        WHEEL DIAMETER 60″
        TEETH PER WHEEL 40
        TOOTH DIAMETER 7.5mm
        RAKE WHEEL HUBS Tapered Bearings
        TRANSPORT WIDTH 10′
        TRANSPORT LENGTH 19′
        TRANSPORT HEIGHT IN TRANSPORT POSITION 86″
        RAKING WIDTH 15′ – 19′
        WINDROW WIDTH ADJUSTMENT 3′ – 5′
        NO. OF RAKING POSITIONS 6
        GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
        ACTION CYLINDER – RAISE/LOWER 4 ?″
        WING CYLINDERS 2″
        JACK Standard
        WEIGHT 1,800#
        CENTER KICKER WHEEL Optional
        TRANSPORT WHEELS (2) – ST205/75D15
        ADJUSTABLE BALL HITCH Optional
        3110
        NUMBER OF WHEELS 10
        WHEEL DIAMETER 60″
        TEETH PER WHEEL 40
        TOOTH DIAMETER 7.5mm
        RAKE WHEEL HUBS Tapered Bearings
        TRANSPORT WIDTH 10′ 8″
        TRANSPORT LENGTH 21′
        TRANSPORT HEIGHT IN TRANSPORT POSITION 101″
        RAKING WIDTH 18′ – 22′
        WINDROW WIDTH ADJUSTMENT 3′ – 6′
        NO. OF RAKING POSITIONS 10
        GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
        ACTION CYLINDER – RAISE/LOWER 4 ?″
        WING CYLINDERS 2″
        JACK Standard
        WEIGHT 2,000#
        CENTER KICKER WHEEL Optional
        TRANSPORT WHEELS (2) – ST205/75D15
        ADJUSTABLE BALL HITCH Optional
        3112
        NUMBER OF WHEELS 12
        WHEEL DIAMETER 60″
        TEETH PER WHEEL 40
        TOOTH DIAMETER 7.5mm
        RAKE WHEEL HUBS Tapered Bearings
        TRANSPORT WIDTH 12′
        TRANSPORT LENGTH 23′
        TRANSPORT HEIGHT IN TRANSPORT POSITION 105″
        RAKING WIDTH 20′ – 24′
        WINDROW WIDTH ADJUSTMENT 3′ – 6′
        NO. OF RAKING POSITIONS 10
        GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
        ACTION CYLINDER – RAISE/LOWER 4 ?″
        WING CYLINDERS 2″
        JACK Standard
        WEIGHT 2,250#
        CENTER KICKER WHEEL Optional
        TRANSPORT WHEELS (2) – ST205/75D15
        ADJUSTABLE BALL HITCH Optional

        WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.


        A 49″ Center Kicker Wheel is optional on the 1100, 2100, and 3100 Series Rakes.

        There was clearly a definite simply click within the keyless functions whenever environment time, and patek philippe replica the date quickset was very irratic, the two typical troubles in order to Seiko 62xx calibres while don begins to placed in.
        一肖一马特期期准